|

 Main application:
The HP pump, as all BELL
pumps can be used in all hydraulic applications, especially in those
which require high pressures and in all cases in which the flow must be
controlled so to assure the right precision on work. |
The HP pump is operated
through a foot pedal and it's small, handy and portable.
It is compact and have an
oil capacity of 1,4 litres (this is the only tank capacity available fo
this type of pump), enough to fill up long cylinders.
The HP is meant for high
working pressures: 250 - 500 up to 700bar depending on the choice of the
size of the piston, to obtain respectively 2,2 - 1,4 e 0,8 L/min
of max oil flow.
The oil port connection
is designed to swivel, enabling easy fixing of the hydraulic hose (standard
thread 3/8" - 18 NPTF).
The HP pump, as well as
all the air-hydraulic pumps by BELL, can be connected to the normal
pneumatic circuit 5/8 bar and over, and it is equipped with a
replaceable internal air filter.
A pneumatic relief valve
is incorporated, whch safeguards the hydraulic components irrespective
of inlet ir pressure, the valve is externally adjustable and lead sealed.
The release valve for the
oil return inside the tank is integrated in the HP unit and operatated
through the pedal by pushing the "RELEASE" zone. Such valve is
hydraulically damped to avoid shock in the system.
The oil pressure attained
is not affected by any drop of pressure in the air line or even the air
line being disconnected.
The pump works even if
it's not connected to the cylinder.
The HP pump is also
fitted with a silencer which contributes towards a good working
environment (max 78/80 dbA at 1 m. of distance). |